Offices and meeting rooms
Lighting and air conditioning systems are often left running 24 hours a day even when employees are away from their offices for several hours days or during annual vacations
The Lotus motion and light sensor system can be installed without changing lighting or air conditioning units or carrying out any work that disrupts operations After installation lighting and air conditioning automatically operate when occupancy is detected and turn off after a few minutes of no presence as defined during system design
For large areas spaces are divided into zones that operate independently based on occupancy This results in electricity savings of up to 80%
Guest meeting and event halls
Lighting and air conditioning systems are often left running 24 hours a day whether guests are present or not
With the Lotus motion and light sensor system installed there is no need to modify existing systems or disrupt operations The system automatically activates lighting and air conditioning when occupancy is detected and turns them off after a few minutes of no presence as defined during system design
Large spaces can be divided into zones that operate independently based on occupancy achieving up to 80% electricity savings
Corridors and staircases
Corridors and staircases are typically occupied for no more than three hours per day especially during low usage periods yet lighting often remains on 24/7 or at least 12 hours per day
After installing the Lotus motion and light sensor system lighting remains at a low level and increases automatically when someone passes through before dimming again once they leave
Staircases are controlled per floor while corridors are divided into longitudinal sections This results in electricity savings of up to 80%
Parking garages
Garage occupancy typically does not exceed three hours per day while lighting often remains on 24 hours or at least 12 hours per day
After installing the Lotus motion and light sensor system corridors remain continuously dimly lit or only active at night while parking spaces are only illuminated when a person is detected in a specific bay
This results in electricity savings of up to 80%
Bathrooms storage rooms and workshops
These areas are typically occupied for no more than three hours per day yet lighting often remains on 24/7
With the Lotus motion and light sensor system installed lighting operates only when occupancy is detected and automatically switches off after a few minutes of no presence as defined during system design
This results in electricity savings of up to 80%