Clinics laboratories and meeting rooms
Lighting and air conditioning systems are often left running for 12 hours and sometimes up to 24 hours per day even when staff are away from these areas for several hours days or during holidays and annual vacations
The Lotus motion and light sensor system can be installed without changing lighting or air conditioning units or carrying out any work that disrupts operations After installation lighting and air conditioning automatically operate when occupancy is detected and turn off after a few minutes of no presence as defined during system design
For large spaces areas are divided into independent zones that operate separately based on occupancy This results in electricity savings of up to 70%
Bathrooms and storage rooms
The cumulative usage of bathrooms and storage rooms does not exceed two hours per day yet lighting is often left on 24 hours a day throughout the year
With the Lotus motion and light sensor system installed lighting operates only when occupancy is detected and automatically switches off after a few minutes of no presence as defined during system design This results in electricity savings of up to 80%
Corridors and staircases
Corridors and staircases are typically occupied for no more than three hours per day yet lighting often remains on 24 hours a day or at least 12 hours per day
After installing the Lotus motion and light sensor system lighting remains at a low level and increases automatically when a person passes before reaching full brightness
Staircases are controlled per floor meaning lighting operates only on the occupied floor while corridors are divided into longitudinal sections This results in electricity savings of up to 80%
Parking garages
Garage occupancy typically ranges from three to six hours per day while lighting often remains on 24 hours or at least 12 hours per day even when natural daylight is available
After installing the Lotus motion and light sensor system corridors remain dimly lit continuously or only during nighttime when there is no natural light while parking spaces are only illuminated when a person is detected in a specific parking bay
This results in electricity savings of up to 80%
For more efficient energy use combine motion light and occupancy sensors for electricity and energy savings