Offices workshops and meeting rooms
Lighting and air conditioning systems are often left running for around 12 hours per day even when employees are not present in these areas and this may also continue during weekends and annual holidays which leads to significant wasted energy increases electricity bills and reduces the lifespan of lamps and air conditioning units
The system can be installed without changing lighting or air conditioning units or carrying out any work that disrupts operations After installing the Lotus motion and light sensor system lighting and air conditioning automatically operate when occupancy is detected and switch off after a few minutes of no presence as defined during system design
For large open spaces the area is divided into zones that operate independently based on occupancy This results in electricity savings of up to 80%
Bathrooms and storage rooms
The cumulative usage of bathrooms and storage rooms does not exceed three hours per day yet lighting is often left on 24 hours a day throughout the year
With the Lotus motion and light sensor system installed lighting operates only when occupancy is detected and automatically switches off after a few minutes of no presence as defined during system design This results in electricity savings of up to 80%
Production hangars
Hangar operating hours typically reach 14 hours per day in two shifts or 7 hours per day in a single shift while lighting systems often remain on for 12 or 24 hours per day
After installing the Lotus motion and light sensor system lighting operates only when occupancy is detected and switches off automatically after a few minutes of no presence as defined during system design This results in electricity savings of up to 80%
Corridors and staircases
Corridors and staircases are typically occupied for no more than three hours per day and become completely unused during holidays yet lighting often remains on 24 hours a day or at least 12 hours per day
After installing the Lotus motion and light sensor system a low level of lighting is maintained on all floors or the area remains off and lighting automatically increases only on the specific floor where a person is present without discomfort or delay
Staircases are controlled per floor while corridors are divided into longitudinal sections This results in electricity savings of up to 80%