Offices and meeting rooms
Lighting and air conditioning systems are often left running for 12 hours and sometimes up to 24 hours per day even when employees are away from these areas for several hours days or during holidays and annual vacations
The Lotus motion and light sensor system can be installed without changing lighting or air conditioning units or carrying out any work that disrupts operations After installation lighting and air conditioning automatically operate when occupancy is detected and switch off after a few minutes of no presence as defined during system design
For large spaces areas are divided into independent zones that operate based on occupancy This results in electricity savings of up to 70%
Open areas in data centers
These spaces contain IT racks and communication equipment which are managed from control rooms and accessed only during monthly maintenance however lighting in these large areas often remains on 24 hours a day throughout the year
The area is divided into corridors or zones with low-level lighting or completely off states that automatically activate when a person approaches and turn off after the person leaves the corridor or zone after a predefined delay set during system design
This results in electricity savings of up to 95% in lighting consumption
Bathrooms and storage rooms
The cumulative usage of bathrooms and storage rooms does not exceed three hours per day yet lighting is often left on 24 hours a day throughout the year
With the system installed lighting operates only when occupancy is detected and automatically switches off after a few minutes of no presence as defined during system design This results in electricity savings of up to 80%
For more efficient energy use combine motion body and light sensors for electricity and energy savings